CHEETAH MOUNTS APDAM3B PLASMA LED LCD ARTICULATING DUAL ARM FLAT SCREEN TV WALL MOUNT BRACKET

  • Covers Hole Patterns 28.5″ Horizontal by 19″ Vertical and Up to VESA 600×400mm
  • Extends to 21″ And Collapses To Less Than 4.5″ From The Wall
  • +/- 15° of Downward Tilt
  • Built-in Bubble Level and 6″ 3-Axis Magnetic Bubble Level Included
  • All Installation Hardware Included
Product Description
The APDAM3 articulating arm mount features a flat profile of 4.5″ profile from the wall to the back of your display and a full extension of 21″ from the wall as well as +/-15 degrees of tilt. The APDAM3 mount is constructed with 28LBS of 100% High Grade Steel providing a sturdy and reliable mount. The APDAM3’s solid wall plate allows for quick and easy installation and will support a wide variety of stud applications up to 17″ apart. The APDAM3 mount will fit the ma… More >>

Price: $58.00



Share and Enjoy:
  • Print
  • Digg
  • del.icio.us
  • Facebook
  • Mixx
  • Google Bookmarks
  • FriendFeed
  • MySpace
  • Propeller
  • StumbleUpon
  • Technorati
  • Yahoo! Bookmarks

Tags: , , , , , , , , , ,

5 Responses to “CHEETAH MOUNTS APDAM3B PLASMA LED LCD ARTICULATING DUAL ARM FLAT SCREEN TV WALL MOUNT BRACKET”

  1. J. deckard says:

    I recently bought this Tv wallmount to hang my new 42″ Toshiba clearscan 240 LCD. I was admittedly apprehensive about hanging my tv up on the wall, but after reading the reviews on the previous model by Cheetah and hearing the lone review on the newer model of wall mount, I decided to go for the upgraded model.

    I am certainly glad that I did! The build quality of this beast of a mount is high, though just like the original mount it’s fasteners are somewhat suspect, so I did what other recommended and went out and bought new bolts and jam nuts. (A tiny cost of 45cents for a few heavy duty nuts and bolts)

    The assembly was straight forward, instructions easy to follow and it certainly holds up well under even my bodyweight when I tested the strength of it on the wall (didn’t budge an inch). The fact that it’s rated to hold far more then my tv’s 59pounds was certainly a major plus in my mind.

    The mounts movements are fluid, easily adjusted and seady when your done positioning it. I’ve got it hung so that it’s positioned in a corner of the room, so as I move around to different area’s of the room, such as my gaming desk I just turn it easily to face the desk, or the couch for movies/tv watching.
    Rating: 5 / 5

  2. Max S Wilson says:

    The mount arrived on time.

    I bought this to hang my Toshiba 52″ above the fire place.

    The instructions are easy to follow and any and all hardware come with the mount.

    My only complaint is the mounting bracket, It could be wider.

    The stud’s in the wall are wider than 18″ (non load bearing wall)

    If it came with some sort of “extender” bracket then this unit would be absolutly PERFECT!.

    I ended up cutting the sheetrock and added more 2×4 in the wall and put the sheet rock back.(wasn’t too bad)

    Once it was mounted, I extended the arm and put my weight on it (210lbs) this thing did not budge!

    Very sturdy unit, it suprised the heck out of me.

    I will buy another one without hesitation as soon as I get another flat TV for my bedroom.

    Hope this help’s!!!!

    Max
    Rating: 4 / 5

  3. Kirt Krause says:

    Not going to repeat what has already been said, however I will make a few points.

    1 – Use at least a 2 foot level (all I have are 4 foot). The built-in level is convenient, however it was off by well over an inch. I never unwrapped the provided torpedo level that was also included. I would do that regardless of the brand.

    2 – Get assistance unless you want to do what I done – disassemble the arms to mount it.

    I’m sure I am forgetting 1 other, but it escapes me.

    Other than the 2 tips, if you’re looking for a solid articulating mount – don’t hesitate. My 58C550 plasma is neatly hanging (corner mounted) above the new Sanus wall mount component rack Sanus Systems VF5022-B1 Dual Column Wall-Mounted Furniture Component with 2 Shelves
    Rating: 5 / 5

  4. Joseph Boese says:

    Mount seems to be very sturdy. Only issue so far is that the level which is built on to the mount is NOT actually square! Do not use the level on the mount to align it.
    Rating: 5 / 5

  5. SnarkySmurf says:

    We bought this to mount our Sharp Aquos LED tv. It works perfectly, they included lots of hardware for many different styles/sizes of TVs, it is VERY sturdy. If I had to complain about anything it would be that the way it sits etc. makes it hard to grab the mount directly and it requires a lot of effort to change the position. The temptation is there to push/pull on the actual TV to change the position but obviously you don’t want to do that. Having said that I would absolutely buy this again because I’d rather my TV was held by something that is TOO sturdy rather than not sturdy enough. Highly recommended.
    Rating: 5 / 5



Latest Posts


Seiki Digital SE50UY04 50-Inch 4K UHD 120Hz LED HDTV
oCOSMO 32-Inch 720p 60Hz LED MHL & Roku Ready HDTV, Brush Pattern Black
Samsung UN46F5000 46-Inch 1080p 60Hz Slim LED HDTV
Magnavox 24ME403V/F7 24-Inch 60Hz LED HDTV
Samsung UN40H6350 40-Inch 1080p 120Hz Smart LED TV